Description
Overview
The used FUJIKURA 90S is a professional core-alignment fusion splicer engineered for single-fibre splicing across all standard ITU-T fibre types, delivering average splice losses as low as 0.02 dB on G.652 single-mode fibre. It is suited to field technicians and network contractors requiring a high-reliability splicing platform at a significantly reduced cost relative to new equipment. Purchasing at Grade C provides access to a fully operational, performance-verified instrument where cosmetic condition is secondary to functional output. This unit has been physically received, inspected, and graded by the OMIWAA in-house technical team prior to listing.
Technical Specifications
- Fibre alignment method: Active core alignment
- Fibre count: Single fibre
- Applicable fibre types: Single-mode (SM), multimode (MM); cladding diameter 80–150 µm
- Applicable coating diameter: Up to 3,000 µm (sheath clamp); cleave length 5–16 mm
- Display: 4.9-inch TFT touchscreen; magnification 200–320×
- Splice time: SM FAST mode avg. 7–9 sec; AUTO mode avg. 14–16 sec
- Heat shrink sleeve: Max. length 66 mm, max. diameter 6.0 mm (pre-shrink); heat time avg. 9–10 sec (60 mm slim) / 13–15 sec (60 mm standard)
- Tensile test force: Approx. 2.0 N
- Electrode life: Approx. 5,000 splices
- Battery: Rechargeable Li-ion, approx. DC 14.4 V / 6,380 mAh; approx. 300 splice-and-heat cycles per charge; approx. 500 recharge cycles total life
- Power supply: AC 100–240 V, 50/60 Hz, max. 1.5 A
- Connectivity: USB 2.0 Mini-B (PC), USB 2.0 Type-A (external LED lamp), Bluetooth 4.1 LE, Mini DIN 6-pin (ribbon stripper)
- Data storage: 100 splice modes, 30 heat modes, 20,000 splice results, 100 splice images
- Dimensions: Approx. 170 × 173 × 150 mm (W × D × H, without projection)
- Weight: Approx. 2.8 kg including battery
- Operating temperature: −10 to +50 °C; storage −40 to +80 °C
- Operating humidity: 0–95 % RH non-condensing
- Altitude: Up to 5,000 m
- Tripod mount: 1/4-20 UNC
- Automatic functions: Fibre-type analysis for splice mode selection, fusion power auto-calibration, motorised wind protector, sheath clamp, heater lid and clamp
- Reference documentation: Video and PDF guides stored on-device
Key Performance Parameters
- Splice loss G.652 (SM): Avg. 0.02 dB — production-grade performance for FTTx and backbone splicing
- Splice time (FAST mode): Avg. 7–9 sec — competitive cycle time for high-volume field work
- Battery autonomy: Approx. 300 splice-and-heat cycles — adequate for a full field day without recharging
- Active core alignment: Ensures consistent loss results across mixed and aged fibre stock, not dependent on geometric fibre quality
Condition Report — Grade C
This unit is graded C (Fair): the chassis exhibits normal operational wear including surface scratches and the onset of superficial oxidation on metallic components. A visible impact is present on the rear right corner of the unit, resulting in a slight deformation of the housing cover; this deformation has no effect on optical, mechanical, or electrical function. All operational modes, alignment routines, splicing functions, and heater cycles have been tested and confirmed fully functional; the arc counter reads 1,810 arcs at the time of inspection.
Common Use Cases
The used FUJIKURA 90S is appropriate for the following professional splicing applications:
- FTTx last-mile deployment — single-fibre splicing at splice enclosures, distribution points, and subscriber terminations in GPON and XGS-PON architectures
- Outside plant cable jointing — field splicing of loose-tube and tight-buffered SM/MM cables in aerial, buried, and duct installations
- Backbone and feeder network construction — low-loss splicing on G.652/G.654/G.655 fibre for metro and long-haul segments requiring documented splice attenuation records
- In-building and FTTA installations — compact form factor and Bluetooth data export support structured cabling and distributed antenna system fibre termination workflows
- Fibre repair and emergency restoration — fast FAST-mode cycle times and portable battery operation support rapid fault restoration in live network environments
Included in the Box
- Fujikura 90S fusion splicer unit
- Cleaver Fujikura CT-50
- Hard carrying case
Note: No AC power adapter / charger is included with this unit. A compatible charger (AC 100–240 V input, DC 14.4 V output) must be sourced separately.
Shipping & Returns
Free worldwide shipping.
Estimated total delivery: 4–12 business days. OMIWAA’s 30-day return policy applies: a full refund is issued if the item is not as described — full terms are available at omiwaa.com/refund-policy .
Why Buy From Omiwaa
Every used FUJIKURA 90S sold by OMIWAA is physically received at our warehouse, inspected against published specifications, and graded by a technical team with combined expertise in professional equipment inspection and evaluation — no units are listed on consignment or without direct verification. OMIWAA operates exclusively as a direct B2B seller: we own, warehouse, and ship every instrument ourselves, with no third-party intermediaries, free worldwide shipping included as standard, and a 30-day return guarantee on every order. For procurement teams and field engineering organisations requiring accountable, traceable sourcing of professional splicing equipment, OMIWAA provides a direct and auditable supply channel.
Browse the full range of available instruments in our used fusion splicer catalog.
